General Safety Tips

1. Electric Skateboard is intended for use by person’s aged 7 or above.

2. Operators must comply with all local laws and regulations. Check with your local police or transport department to determine local requirements. Pay special attention to local helmet laws.

3. Always wear your ANSI or Snell-approved helmet. Elbow and kneepads will protect you from laceration in case of a fall.

4. Do not operate the Electric Skateboard at night. Electric Skateboard is not equipped to be operated in the dark or low light condition. It may not be easily visible to pedestrians or other Electric Skateboard.

5. Ride only on smooth hard surface. Electric Skateboard are not designed to be used in off road conditions or for riding up hills. Use caution when rolling over obstacles.

6. The electric motor, batteries, and controls can be damaged if exposed to water. Do not allow the Electric Skateboard to be used in the rain, nor to be driven though puddles of water.

7. The product is allowed for use by only one person. Do not carry additional person or item. Do not put additional load on the Electric Skateboard by pulling or towing anything.

8. Your insurance policy may not provide coverage for accidents involving this product. Contact your insurance agent for more information.

9. Do not make the stunts or jumps like you would do with ordinary skateboard. You might seriously damage the Electric Skateboard and injure yourself or others. Be considerate, ride safely and in style.

Mechanical Safety Tips

1. Check all joints, hinges and quick releases to ensure the Electric Skateboard is properly assembled.

2. Stop using the product immediately if any joint, hinge, or quick release becomes loose. Correct the looseness prior to resuming the ride.

3. Maintain proper tightness on the wheels screws. Too tight screw pressure on axle increases friction, reduces speed and operation time, as well wears the tires quicker.

Electrical Safety Tips

1. Completely charge the battery before riding the Electric Skateboard for the first time.

2. Disconnect the battery from the motor lead when not in use.

3. Use caution when recharging the batteries. Do not recharge in an area that will allow the Electric Skateboard or the charging unit to become wet. Recharge only in an area that is well ventilated.

4. Keep children away from the Electric Skateboard while it is being recharged.

5. Stop use of the product or the charging unit if any wire becomes worn, broken, or damaged in any way.

6. Do not modify the electrical controls or writing. Use only motors, batteries, and charging units supplies or approved for Electric Skateboard.

7. Do not use the Electric Skateboard battery to power or recharge any other equipment.

8. Do not block the air vents on the charging unit. If blocked, the charging unit may overheat and create a fire hazard.